Synthesis and structure of tris(triphenyltin)benzene-1,3,5-tricarboxylate and its tri-DMSO adduct

The molecular structure of (Ph₃SnO₂C)₃C₆H₃ reveals distorted tetrahedral C₃O geometries for each tin atom. No intermolecular Sn...O associations occur between the molecules so that the trinuclear molecule may be considered monomeric. An increase in coordination number at tin is indicated by ¹¹⁹Sn NMR measurements conducted in d₆-DMSO solution and this has been confirmed by a structure analysis of (DMSO·Ph₃SnO₂C)₃C₆H₃·2 DMSO. In this structure, the tin atom geometries are distorted trigonal bipyramidal, existing within trans-C₃O₂ donor sets. Thus, while is it possible for the tin atoms to increase their coordination numbers in (Ph₃SnO₂C)₃C₆H₃, molecular aggregation to form polymeric arrays is precluded, most likely due to steric constraints.

Partial exfoliation of layered double hydroxides in DMSO : a route to transparent polymer nanocomposites

Layered double hydroxides (LDHs), either having nitrate counter anions or intercalated with organic molecules, have been for the first time partially exfoliated in dimethyl sulfoxide (DMSO) to form a transparent suspension. Atomic force microscopy (AFM) images showed that both the lateral size and the thickness of the LDH nanoplatelets were decreased after the exfoliation. The organic-LDHs maintained their intercalation characteristics, i.e. the thermal stability improvement of the incorporated organic anions, after the exfoliation in DMSO. Transparent ethylene-vinyl alcohol copolymer (EVOH) nanocomposite films containing partially exfoliated LDHs intercalated with UV absorbers were prepared using DMSO as the processing solvent. As the first reported example of a highly transparent LDH/polymer composite, the obtained composite film had a visible light transmittance of 90% (comparable to that of the pure matrix), was flexible and exhibited an excellent UV-shielding capability and thermal stability.

4-Amino-1,8-naphthalimide-based anion receptors: employing the naphthalimide N-H moiety in the cooperative binding of dihydrogenphosphate

The 4-amino-1,8-naphthalimide-based anion receptor 3 binds dihydrogenphosphate with 1:1 stoichiometry through cooperative hydrogen bonding to a naphthalimide N–H and thiourea N–H groups. This was clearly established from ¹H NMR titration experiments in DMSO-d₆ where a substantial shift in the resonance for the naphthalimide N–H was observed concomitant with the expected thiourea N–H chemical shift migration upon successive additions of H₂PO₄⁻. However, whilst ¹H NMR titration experiments indicate that 3 was capable of binding other anions such as acetate, the naphthalimide N–H does not participate and the N–H resonance was essentially invariant during the titration. The lack of cooperative binding in this instance was justifiable on steric grounds.

Fluorescent anion sensors based on 4-amino-1,8-naphthalimide that employ the 4-amino N-H

The new charge neutral 4-amino-1,8-naphthalimide based anion sensors 2 and 3 bind to both acetate and dihydrogenphosphate with 1:1 stoichiometry through hydrogen bonding to both thiourea N–H atoms and in the case of dihydrogenphosphate, the naphthalimide 4 amino N–H group as well. This was clearly established from ¹H NMR titration experiments with H₂PO₄^- in DMSO-d₆ where a substantial shift in the resonance for the naphthalimide N–H was observed concomitant with the expected migration of the thiourea N–H chemical shifts. The binding constants determined from the titration studies indicate that the new sensors bind H₂PO₄^- more strongly than AcO⁻. Fluorescence titrations with sensor 3 indicate quenching of 59% and 36% upon addition of acetate and dihydrogenphosphate, respectively.

Fluorescent photoinduced electron transfer (PET) sensors for anions; from design to potential application

This mini review highlights the synthesis and photophysical evaluation of anion sensors, for nonaqueous solutions, that have been developed in our laboratories over the last few years. We have focused our research mainly on developing fluorescent photoinduced electron transfer (PET) sensors based on the fluorophore-spacer-anion receptor principle using several anthracene (emitting in the blue) and 1,8-naphthalimide (emitting in the green) fluorophores, with the aim of targeting biologically and industrially relevant anions such as acetates, phosphate and amino acids, as well as halides such as fluoride. The receptors and the fluorophore are separated by a short methyl or ethyl spacer, where the charge neutral anion receptors are either aliphatic or aromatic urea (or thiourea) moieties. For these, the anion recognition is through hydrogen bonding, yielding anion:receptor complexes. Such bonding gives rise to enhanced reduction potential in the receptor moieties which causes enhancement in the rate of PET quenching of the fluorophore excited state from the anion:receptor moiety. This design can be further elaborated on by incorporating either two fluorophores, or urea/thiourea receptors into the sensor structures, using anthracene as a fluorophore. For the latter design, the sensors were designed to achieve sensing of bis-anions, such as di-carboxylates or pyrophosphate, where the anion bridged the anthracene moiety. In the case of the naphthalimide based mono-receptor based PET sensors, it was discovered that in DMSO the sensors were also susceptible to deprotonation by anions such as F− at high concentrations. This led to substantial changes in the absorption spectra of these sensors, where the solution changed colour from yellow/green to deep blue, which was clearly visible to the naked eye. Hence, some of the examples presented can act as dual fluorescent-colorimetric sensors for anions. Further investigations into this phenomenon led to the development of simple colorimetric sensors for fluorides, which upon exposure to air, were shown to fix carbon dioxide as bicarbonate.

Factors influencing anion binding stoichiometry : the subtle influence of electronic effects

Six new, charge-neutral norbornene-based receptors 1a,1b– 3a,3b were prepared, and their ability to interact with simple anions in DMSO was investigated using 1H NMR and UV/ Vis spectroscopy. Binding of dihydrogenphosphate by the six receptors appeared to be based solely on steric constraints. In contrast, the binding stoichiometry of 3a and 3b to acetate was controlled by subtle electronic factors.

Using omeprazole to link the components of the post-prandial alkaline tide in the spiny dogfish, Squalus acanthias

After a meal, dogfish exhibit a metabolic alkalosis in the bloodstream and a marked excretion of basic equivalents across the gills to the external seawater. We used the H⁺, K⁺-ATPase pump inhibitor omeprazole to determine whether these post-prandial alkaline tide events were linked to secretion of H⁺ (accompanied by Cl^–) in the stomach. Sharks were fitted with indwelling stomach tubes for pretreatment with omeprazole (five doses of 5mg omeprazole per kilogram over 48 h) or comparable volumes of vehicle (saline containing 2% DMSO) and for sampling of gastric chyme. Fish were then fed an involuntary meal by means of the stomach tube consisting of minced flatfish muscle (2% of body mass) suspended in saline (4% of body mass total volume). Omeprazole pretreatment delayed the post-prandial acidification of the gastric chyme, slowed the rise in Cl^– concentration of the chyme and altered the patterns of other ions, indicating inhibition of H⁺ and accompanying Cl^– secretion. Omeprazole also greatly attenuated the rise in arterial pH and bicarbonate concentrations and reduced the net excretion of basic equivalents to the water by 56% over 48h. Arterial blood CO₂ pressure and plasma ions were not substantially altered. These results indicate that elevated gastric H⁺ secretion (as HCl) in the digestive process is the major cause of the systemic metabolic alkalosis and the accompanying rise in base excretion across the gills that constitute the alkaline tide in the dogfish.

Dual responsive chemosensors for anions : the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV–vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV–vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.

On the components of the dielectric constants of ionic liquids : ionic polarization?

According to dielectric spectroscopy measurements, ionic liquids (ILs) have rather modest dielectric constants that reflect contributions from distortion and electronic polarization caused by the molecular polarizability as well as the orientation polarization caused by the permanent dipole moment of the ions. To understand the relative importance of these various contributions, the electronic polarizabilities of 27 routinely used ionic liquid ions of different symmetry and size were calculated using ab initio-based methods such as HF and MP2. Using the Clausius–Mossotti equation, these polarizabilities were then used to obtain the electronic polarization contribution (ε_op) to the dielectric constants of six ionic liquids, [C₂mim][BF₄], [C₂mpyr][N(CN)₂], [C₂mim][CF₃SO₃], [EtNH₃][NO₃], [C₂mim][NTf₂] and [C₂mim][EtSO₄]. Theoretical ε_op values were compared to experimental refractive indices of these ionic liquids as well as to those of traditional molecular solvents such as water, tetrahydrofuran (THF), dimethylsulfoxide (DMSO) and formamide. The dipole moments of the ions were also calculated, and from these it is shown that the molecular reorientation component of the dielectric constants of the ionic liquids consisting of ions with small or negligible dipole moments is quite small. Thus it is concluded that a contribution from a form of “ionic polarization” must be present.

Gel electrolytes based on lithium modified silica nano-particles

In this work lithium modified silica (Li-SiO₂) nano-particles were synthesized and used as a single ion lithium conductor source in gel electrolytes. It was found that Li-SiO₂ exhibited good compatibility with DMSO, DMA/EC (a mixture of N,N-dimethyl acetamide and ethylene carbonate) and the ionic liquid, N-methyl-N-propyl pyrrolidinium bis(trifluoromethylsulfonyl) amide ([C₃mpyr][NTf₂]). Several gel electrolytes based on Li-SiO₂ were obtained. These gel electrolytes were investigated by DSC, solid state NMR, conductivity measurements and cyclic voltammetry. Conductivities as high as 10⁻³ S/cm at room temperature were observed in these nano-particle gel electrolytes. The results of electrochemical tests showed that some of these materials were promising for using as lithium conductive electrolytes in electrochemical devices, with high lithium cycling efficiency evident.

Gel electrolytes based on lithium macro-anion salt

Montmorillonites are composed of aluminosilicate layers stacked one above the other, and the layer thickness is approximately 1 nm. In this work lithium modified montmorillonite (Li-MMT) was prepared and used as a lithium macro-anion salt in gel electrolytes. It was found that Li-MMT exhibited good compatibility with poly(ethylene glycol), DMSO and the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIdca), and a few of novel gel electrolytes based on Li-MMT were obtained. These gel electrolytes were investigated by X-ray powder diffraction, solid state NMR, conductivity measurements and cyclic voltammetry. High conductivities up to 10^{− 4} to 10^{− 3} S/cm at room temperature were observed with these macro-anion gel electrolytes. These gel materials were promising to be used as lithium conductive electrolytes in electrochemical devices, such as lithium batteries.

Aggregation, ageing and transport properties of surface modified fumed silica dispersions

We have investigated the aggregation, ageing and transport properties of surface modified silica dispersions in DMSO by photon correlation spectroscopy and conductivity measurements. The surface modification introduces Li+-ions that dissociate in the dispersion creating a single Li+-ion conducting electrolyte. We show that the surface modification changes the aggregation and ageing properties of the material. There is a pronounced ageing observed for the modified silica dispersions. At high concentrations of fumed silica a gel state is found, which in the case of the surface modified silica is a very weak gel that can be rejuvenated by ultrasonic treatment. The key parameter controlling the aggregation in this system is hydrogen bonding and the surface modification results in a very low number of sites for hydrogen bonding. In addition there is a contribution from repulsive electrostatic interactions in the surface modified silica dispersions due to the highly charged surfaces of these particles. Furthermore, the Li+-ion diffusion, at low silica concentration, is three orders of magnitude faster than that of the silica particles and in the gel state the silica particles are immobile. We also find that the Li+-ion diffusion is virtually independent of the silica concentration in the dispersions.